CFYKN - PM 335 ZINC ICP STANDARD

  • MSDS: CFYKN
  • Manufacturer: SPECTRUM CHEMICAL MFG CORP
  • Product Name: PM 335 ZINC ICP STANDARD
  • National Stock Number: 6810-00D007119
Product Identification

Product ID:PM 335 ZINC ICP STANDARD
MSDS Date:12/17/1996
FSC:6810
NIIN:00D007119
MSDS Number: CFYKN

Responsible Party
SPECTRUM CHEMICAL MFG CORP.
14422 SOUTH SAN PEDRO STREET
GARDENA, CA 90248-2027
US

Emergency Phone: 310-516-8000/800-424-9300(CHEMTREC)

Info Phone: 310-516-8000

Preparer: E. BRULL

Cage: 63415

Contractor
SPECTRUM LABORATORY PRODUCTS INC
GARDENA, CA 90248-2027 US

Telephone: 310-516-9843

Cage: 63415

Ingredients

ZINC (SARA 313) (CERCLA)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 0.1%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 95.1%


NITRIC ACID (SARA 302/313) (CERCLA)

CAS: 7697-37-2

RTECS: QU5775000

Fraction By Weight: 3.5%

OSHA PEL 2 PPM

ACGIH TLV: 2 PPM/4 STEL; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:LC50 (RAT): 1914 PPM (CALCULATED)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE TO SKIN ON CONTACT, SKIN
IRRITANT/BURNS; CAN BE ABSORBED IN HARMFUL AMOUNTS BY SKIN. SEVERE
EYE IRRITANT ON CONTACT. INHALATION MAY CAUSE SEVERE IRRITATION OF
RESPIRATORY TRACT. CAN BE FATAL IF INHALED OR INGESTED.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SKIN-BURNS, ITCHING, SCALING, REDDENING,
BLISTERING. EYES-REDNESS, WATERING, ITCHING. INHALED-COUGHING,
CHOKING, SHORTNESS OF BREATH. INGESTD-NONE NOTED; VERY DANGEROUS IF
SWALLOWED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IN ALL CASES GET IMMEDIATE MEDICAL ATTENTION. EYES-REMOVE
CONTACTS. FLUSH WITH WATER FOR 15 MINUTES. SKIN-REMOVE CONTAMINATED
CLOTHES. WASH WITH MILD SOAP & WATER. INHALED-REMOVE TO FRESH AIR.
GIVE OX YGEN OR ARTIFICIAL RESPIRATION AS NEEDED. INGESTED-DO NOT
INDUCE VOMITING! IF CONSCIOUS, GIVE SEVERAL GLASSES WATER OR MILK.

Fire Fighting

Flash Point:NON-FLAMABLE
Extinguishing Media:NON-FLAMMABLE. USE MEDIA APPROPRIATE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:NO ADDITIONAL REMARKS.
Unusual Fire/Explosion Hazard:NO ADDITIONAL REMARKS.

Accidental Release

Spill Release Procedures:ABSORB WITH INERT MATERIAL & PUT THE SPILLED
MATERIAL IN AN APPROPRIATE WASTE DISPSOAL CONTAINER. IF NECESSARY,
NEUTRALIZE WITH DILUTE SOLUTION OF SODIUM CARBONATE.
Neutralizing Agent:DILUTE SOLUTION OF SODIUM BICARBONATE.

Handling

Handling and Storage Precautions:STORE IN A METALLIC OR COATED
FIBERBOARD DRUM USING A STRONG POLYETHYLENE INNER PACKAGE. STORE IN
A SEPARATE SAFETY STORAGE CABINET OR ROOM.
Other Precautions:KEEP LOCKED UP. KEEP CONTAINER DRY. KEEP AWAY FROM
HEAT. KEEP AWAY FROM SOURCES OF IGNITION. KEEP AWAY FROM
COMBUSTIBLE MATERIALS. DO NOT INGEST! DO NOT BREATH, GAS, FUME,
VAPOR OR SPRAY. NEVER ADD WA TER TO PRODUCT.

Exposure Controls

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IAW 29 CFR
1910.134.
Ventilation:PROVIDE EXHAUST VENTILATION OR OTHER ENGINEERING CONTROLS
TO KEEP AIRBORNE CONCENTRATIONS BELOW TLV(S).
Protective Gloves:PVC, NEOPRENE.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:FULL IMPERVIOUS (PVC, NEOPRENE) SUIT, BOOTS.
EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:181F,83C
Vapor Pres:18.51
Vapor Density:0.62
Spec Gravity:1.01
pH:<7
Evaporation Rate & Reference:NONE SPECIFIED BY MFR.
Appearance and Odor:CLEAR, COLORLESS LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, ALKALIS, REDUCING AGENTS, COMBUSTIBLE MATERIALS, ORGANIC
MATERIALS, METALS.
Stability Condition to Avoid:NO ADDITIONAL REMARKS.
Hazardous Decomposition Products:NOT APPLICABLE.

Disposal

Waste Disposal Methods:RECYCLE TO PROCESS IF POSSIBLE. CONSULT WITH
LOCAL OR STATE AUTHORITIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.